Bosch GWS Professional 6-100 E Notice Originale page 15

OBJ_BUCH-2541-001.book Page 15 Wednesday, May 13, 2015 9:28 AM
Symbol Meaning
Apply strength for the workstep.
Low speed
High speed
Switching On
Switching Off
On/Off switch lock-on
Releasing the lock-on function of the
On/Off switch
Prohibited action
Permitted action
Next step of action
P Rated power input
1
P Output power
2
n Rated speed
n Speed control adjustment
v
l = Grinder spindle length
d
1
d = Grinder spindle diameter
l 1
D = Max. grinding disc diameter
d
2
d = Inner disc diameter
D
2
Speed preselection
Constant Electronic Control
Reduced starting current
Restarting Protection
Additional information
Surface grinding
Bosch Power Tools
Symbol Meaning
Grinding/sanding with sanding sheet
Weight according to EPTA-Procedure
1
01/2003 with vibration-damping auxil-
iary handle
Weight according to EPTA-Procedure
2
01/2003 with standard-auxiliary handle
Symbol for protection class II (com-
/II
pletely insulated)
L Sound power level
wA
L Sound pressure level
pA
K Uncertainty
a Vibration total value
h
Delivery Scope
Angle grinder, protection guard, auxiliary handle.
Special protection guards, application tools and other acces-
sories shown or described are not part of the standard deliv-
ery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for roughing metal, stone and ceram-
ic materials and for drilling tiles.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
Together with the hand guard (accessory), the machine can
be used for brushing and grinding/sanding with elastic sand-
ing plates.
The machine is suitable only for working without water.
Technical Data
The technical data of the machine are listed in the table on
page 258–260.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until
19 April 2016: 2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amendments and
complies with the following standards: EN 60745-1,
EN 60745-2-3.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
English | 15
1 609 92A 16M | (13.5.15)