Dexter 12SD2-25RC.1A Instructions D'origine page 98

Universal: compatible only with Sterwins UP20, Lexman UP20, and Dexter UP20
TECHNICAL DATA
MODEL
EN
RATED VOLTAGE
SPEED n0
CHUCK CAPACITY
MAX DRILLING
DIAMETER
WEIGHT
SOUND PRESSURE Lpa
SOUND POWER Lwa
UNCERTAINTY Kpa, Kwa
VIBRATION TOTAL VALUE
Drilling in metal ah,D
UNCERTAINTY K
BATTERY PACK AND CHARGER
INFORMATIONS
WARNING :
The vibration and noise emissions during actual use of the power tool can differ from the declared values
depending on the ways in which the tool is used especially what kind of workpiece is processed;
The emissions value need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle
such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
Note:
-The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
- The declared vibration total value and the declared noise emission value may also be used in a preliminary
assessment of exposure.
- Avoid vibration risk.
Suggestion:
1) wear glove during operation
98
Always unplug the device after use or before
maintenance
To reduce the risk of electric shock, do not expose to
water
0-400/0-1500/min
Wood
Metal
Model no for battery pack:
MLC3H-202(SJ20) 12V d.c. 2.0Ah;
24Wh; 3 Li-ion cells Model no
for Charger:JLH201351500G
Input:100-240VAC;50-60Hz;30W
Output:13.5V d.c.; 1500mA
12SD2-25RC.1A
12V d.c.
Ø10mm
25mm
8mm
0.87kg
69dB(A)
77dB(A)
5
0.699m/S²
1.5m/S²
20SD2-35RC.2A 20SD2-35RC.2B
18V d.c. (Max 20V d.c.)
0-400/0-1500/min
Ø13mm
35mm
10mm
1.19kg
79dB(A)
71dB(A)
5
0.706m/S²
1.5m/S²
Compatible with all UP20 batteries
Compatible with all UP20 chargers