Beta Motorcycles RR 250 2T 2017 Mode D'emploi page 134

3
adjuSTiNG ThE SpRiNG pRElOad
Loosen counter-ring E, rotate ring f clock-
wise to increase the spring preload (and
consequently the shock absorber preload)
E
or anticlockwise to decrease it. After ob-
taining the desired preload, turn counter-
ring E until it stops against adjusting ring f.
f
For standard setting, refer to page 12.
NOTE: for the handling of ring nuts use the
specific wrench provided in the standard
tool kit shown in the figure.
GB
44