Beta Motorcycles RR 250 2T 2017 Mode D'emploi page 110

2
3
2
4
ON
GB
1
6
5
Off
a
B
lh SwiTCh
The dip and service switch is located on
the left side of the handlebar and is com-
posed as follows:
1 - Horn button;
2 - Dip switch:
parking lights and high beam;
parking lights and low beam;
3 - Flash-to-pass button;
4 - Turn signal light switch: shifting lever
left or right activates the left or right
indicators. When released, the lever
returns to the central position. Press it
to turn the indicators off.
Rh SwiTCh
Starter button 5 is located on the right-hand
side of the handlebars and operate the
electric engine starter. Press and hold the
button until the engine starts.
Do not press the button 5 while the engine
is running.
The button 6 turns off the engine.
Caution:
Before starting the engine, make sure the
6 button is ON.
fRONT BRaKE lEVER aNd GaS
CONTROl
The front brake lever a and the gas throt-
tle B are located on the right side of the
handlebar.
20