Brooks Instrument 48 Serie Manuel D'installation Et D'utilisation page 9

Installation and Operation Manual
X-TMF-4800-MFC-eng
Part Number: 541B072AAG
October, 2017
These certifications cover the 48xx Series thermal mass flow devices as well as the Local Operator Interface (LOI).
Mark Agency
CSA
ATEX
CE
CSA Special Conditions for safe use:
1. The models are evaluated for an ambient temperature of 0°C to 50°C.
2. The module shall be installed in a suitable enclosure providing a degree of protection of
at least IP54 according to EN 60529, taking into account the environmental conditions
under which the equipment will be used.
ATEX Special Conditions for safe use:
1. The module shall be installed in a suitable enclosure in accordance with EN60079-15,
taking into account the environmental conditions under which the equipment will be used.
2. Provisions shall be made to prevent the rated voltage from being exceeded by transient
disturbances of more than 40%.
A review against the standards EN60079-0:2012, EN60079-15:2010, shows no significant
changes relevant to this equipment. Hence the standards EN 60079-0: 2006, EN 60079-15:
2005 continues to represent "State of the Art"
Hazardous Location Classification
The modules shall be installed in a suitable enclosure providing a degree of protection of at least IP54 according to
EN 60529, taking into account the environmental conditions under which the equipment will be used. Provisions
shall be made to prevent the rated voltage from being exceeded by transient disturbances of more than 40%.
Certification/ Marking/ Directive
Class I, Div 2 Groups A, B, C & D; T4
Class 1, Zone 2, AEx nA II T4
Ex nA II T4
II 3 G Ex nA II T4
EMC Directive
2014/30/EU
RoHS Directive
2011/65/EU
Pressure Equipment Directive
2014/68/EU
Section 1 Introduction
Brooks
Applicable
Standard Details
UL & CSA Certificate No.
Standards 06.CSA150464
EN60079-0:2006
KEMA 06ATEX0251 X
EN 60079-15:2005
EN:61326-1:2013 EMC
RoHS
Sound Engineering
Practice (SEP)
®
48xx Series
1-3