Brooks Instrument 48 Serie Manuel D'installation Et D'utilisation page 14

Section 2 Installation
®
Brooks 48xx Series
2-4 Return Shipment
2-5 Transit Precautions
2-6 Removal from Storage
2-2
Prior to returning any instrument to the factory for any reason, visit our
website for instructions on how to obtain a Return Materials Authorization
Number (RMA #) and complete a Decontamination Statement to
accompany it: BrooksInstrument.com/Service. All instruments returned to
Brooks also require a Material Safety Data Sheet (MSDS) for the fluid(s)
used in the instrument. Failure to provide this information will delay
processing of the instrument.
Instrument must have been purged in accordance with the following:
To safeguard the instrument against transportation damage, it is
recommended to keep the instrument in its factory container until ready for
installation.
Upon removal of the instrument from storage, a visual inspection should be
conducted to verify its "as-received" condition. If the instrument has been
subject to storage conditions in excess of those recommended (See
Section 2-3), it should be subjected to a pneumatic pressure test in
accordance with applicable vessel codes.
Installation and Operation Manual
X-TMF-4800-MFC-eng
Part Number: 541B072AAG
October, 2017