Defrosting Procedure; Changing The Door Hinge - Nordcap ABS Série Manuel D'utilisation

Defrosting Procedure

Refrigerator:
Automatic Defrosting using automatic water evaporation.
Automatic defrost The appliance will automatically run defrost cycles
Note: The cycle starts from the time the appliance is initially powered up.
To manually defrost the appliance:

Press and hold the DEFROST

The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer. The next automatic defrost
will start according to the set parameter after the manual defrost has finished.
Freezer:
Manual defrosting by switching off and disconnecting the plug from the mains socket. Please empty
the freezer first and wait until all the ice inside has been melted. The condensation water
must be collected.
Never use a sharp or pointed object that may damage the freezer / refrigerator.

Changing the Door Hinge

The door can be changed from right hand-hinged to left hand-hinged, or vice versa. To do so, proceed as follows:
1. Switch off power and disconnect from the main socket
Hinge 1*(see remark) Hinge 2
P2M031STD - Ver.1.0
button for 5 seconds.
Hinge 3 (Upper door hinge)
Hinge 4 (Lower door hinge)
11 GB