SOMFY SONESSE2 40 ZIGBEE HP Notice page 16

EN
Using the favourite position (my)
▪ If a favourite position (my) is programmed, briefly press the my button on the
control point twice in succession to move the motorised product to the
favourite position (my).
3.3.Tips and advice on operation
3.3.1.Questions about the product?
Observations
The motorised product does not
operate.
NOTICE
If the motorised product still does not work, contact a drive and home automation professional.
3.3.2.Upgrading a TaHoma ready installation into a TaHoma switch installation
To add a TaHoma switch into a TaHoma ready installation, and then upgrade the installation into a TaHoma switch
installation, follow the instructions on the TaHoma application.
4.TECHNICAL DATA
Frequency bands and
maximum power used
Power supply
Operating temperature
Index protection rating
Safety level
NOTICE
For additional information on the technical data for this drive contact your Somfy representative.
Please separate storage cells and batteries from other types of waste and recycle them via the local collection
facility.
We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an
approved collection point for recycling.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of
such marks by SOMFY ACTIVITIES SA is under license. Other trademarks and trade names are those of their
respective owners.
US Patents US7726379, US8469171, US8330309, US8253288, US8597157, patent pending.
Reference Designation
16
Possible causes
The control point battery is low.
Thermal protection of the drive is on.
2.4 GHz - 2.4835 GHz e.r.p <63mW [USA, Australia, Canada]
2.4 GHz - 2.4835 GHz e.r.p <10mW [Other countries]
120 V 〜 60 Hz
0°C - 60°C
IP30 (For indoor use only)
Class II
Solutions
Check the battery and replace it as
required.
Wait for the drive to cool down.
220 V 〜 60 Hz
©
Copyright 2023 SOMFY ACTIVITES SA. All rights reserved.
SONESSE2 40 ZIGBEE HP
x 2 =
230 V 〜 50 Hz