Publicité
Les langues disponibles
Les langues disponibles
18. CONVERTING THE UPPER
LOOPER INTO SPREADER
Warning:
Switch off the machine before installing or
removing the spreader.
Installing the spreader.
Insert the pin (A) of the spreader in the hole (B)
of the upper looper.
Put the positioning rib (C) in contact with the
upper surface of the looper.
Insert the point (D) in the hole (E) of the upper
looper.
Removing the spreader
Remove the point (D) of the hole (E) of the upper
looper and take the spreader off the looper.
Note: Put the spreader back to the accessory
storage.
26
D
E
C
B
A
Publicité
