34
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the
appliance and shall be installed.
EN
NOTE: It is recommended to perform this task with two people
There are 8 spring latches securing the main
A.
glass door, 4 of those latches are across the
top and 4 along the bottom. To access these
latches, the safety barrier screen and door trim
must be removed.
Using the tool provided, pull the latch forward
B.
and upwards, out of the slot in the door for the
top latches and reverse for the bottom latches,
as shown. Repeat 7 times. Ensure to keep one
hand on the door at all times, to prevent it from
falling on the fl oor.
When all 8 latches have been released pull the
C.
door forward and off of the appliance.
Reverse these steps to reinstall the safety
D.
screen and door trim.
THE 8 LATCHES ARE SHOWN IN THE ILLUSTRATION BELOW.
W415-1334 / 06.10.14
MAGNETS
LATCHES
IMPORTANT: Once latches are engaged,
test that the door is secure and will not
fall forward before letting go.