Description Of Unit; Machine Function - Titan Tool ProMark Série Mode D'emploi

ProMark
3

DeScrIpTIoN of uNIT

3.1

mAchINe fuNcTIoN

The following section contains a brief description of the overall
function of the machine.
This manual gives information for both ProMark
i
100 and ProMark 150 models. Any differences in
function between the two models will be noted.
ProMark 1:1 industrial road marking machines are high-pressure
spraying units driven by a gasoline engine.
The gasoline engine is the central power supply for the entire
system, providing power to all of its necessary auxilliary
equipment, such as the hydraulic pump and air compressor.
fIgure 1
4A
9
5B
6
7
hyDrAulIc pump
•
The gasoline engine (Fig. 1, item 1) drives the hydraulic
pump (2) by means of a V-belt located under the belt cover
(3). Hydraulic oil flows from the pumps (1) to the dual
hydraulic motors (4A / 4B) and causes the piston inside the
fluid sections (5) to stroke up and down.
•
The inlet valve is opened automatically by the upwards
movement of the piston. The outlet valve is opened when
the piston moves downward.
•
This movement draws material from the material
containers, though the siphon hose and delivers it to the
mixing block (6), where the two spray components are
mixed and delivered to the spray gun(s).
AIr compreSSor
•
The gasoline engine also drives the air compressor (7). The
air compressor provides air power to the bead dispenser
(8), and the solvent flush (9).
For a more detailed description of the ProMark's
i
components, see the descriptions on the
following pages.
8
4B
5B
2
1
3
description of unit
9