Technical Data; Operating Temperature; Relative Humidity - Titan Tool ProMark Série Mode D'emploi

description of unit
3.6

TechNIcAl DATA

promark 100
gasoline engine, power
Subaru 211cc OHC (electric
fuel capacity
0.83 US gal (3.1 l)
max. operating pressure
max. sound pressure level
max. size of tip with a spray gun
1-gun 0,038" – 0,96 mm
2-gun 0,054" – 1,37 mm
max. volume flow
2.5 gal (9.5 l)/min
Weight
205 lbs (93 kg)
max. viscosity
Dimensions l x W x h
max. temperature of the coating material
filter insert (standard equipment)
hydraulic oil filling quantity
max. tire pressure
* Place of measurement: 1 m distance from unit and 1.60
m above reverberant floor, 120 bar (12 MPa) operating
pressure.
20
promark 150
211cc OHC (electric
start) start)
0.83 US gal (3.1 l)
24.8 MPa (248 bar, 3600 PSI)
92 dB (A)* 92 dB (A)*
0,038" – 0,96 mm
0,054" – 1,37 mm
2.5 gal (9.5 l)/min
205 lbs (93 kg)
20.000 mPa·s
104 cm x 79 cm x 127 cm
109ºF (43° C)
50 mesh, 18 in2
5.9 l (1.56 gal) CoolFlo
0.2 MPa (2 bar, 30 PSI)

operATINg TemperATure

This equipment will operate correctly in its intended ambient,
at a minimum between +10°C and +40°C.

relATIVe humIDITy

The equipment will operate correctly within an environment
at 50% RH, +40°C. Higher RH may be allowed at lower
temperatures.
Measures shall be taken by the Purchaser to avoid the harmful
effects of occasional condensation.
AlTITuDe
This equipment will operate correctly up to 2100 m above
mean sea level.
TrANSporTATIoN AND STorAge
This equipment will withstand, or has been protected against,
transportation and storage temperatures of -25°C to +55°C and
for short periods up to +70°C.
It has been packaged to prevent damage from the effects of
normal humidity, vibration and shock.
ProMark