Nokia 6275i Guide D'utilisation page 28

4. Select one of the following sequence types:
Access no.+phone no.+card no.—Dial the access number code for the calling
card, the phone number, then enter the card number (and PIN code if required).
Access no.+card no.+phone no.—Dial the access number for the calling card,
card number (plus PIN if required), then enter the phone number.
Prefix+phone no.+card no.—Dial the prefix (numbers that must precede the
phone number) and phone number, then enter the card number (and PINcode
if required).
5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
6. Select Card name > enter the card name > OK.
Select a calling card
You can select one of the calling cards for which you have saved information.
The selected card information is used when you make a card call.
1. Select Menu > Settings > Call > Calling card.
2. Enter your lock code, and select OK. See "Security settings," p. 36.
3. Scroll to the calling card of your choice, and select it.
Make card calls
After you have selected a calling card, make a card call.
1. Enter the phone number, including any prefix (such as 0 or 1) that your
calling card may require when you make a calling card call. See your calling
card for instructions.
2. Press and hold the send key for a few seconds until Card call is displayed.
3. Follow the instructions on the screen.
4. When you hear the tone or system message, select OK.
International prefix
To store an international dialing prefix into your device, select Menu > Settings >
Call > International prefix. In the standby mode, when you enter + (press * twice)
at the beginning of a phone number, your device automatically inserts the
international dialing prefix that you have stored after you press the call key.
See "Insert dialing codes," p. 66.
S e t t i n g s
27