Lenze EMZ9371BC Instructions De Mise En Service page 93

Main menu
No. Display
EDK9371BC DE/EN/FR 3.1
Parameterisation 8200 vector/8200 motec
Submenus
No. Display
5.9 OpenLoopV/f 5
5.9.1 CAN managem
5.9.2 Freq setpt
5.9.3 f limit/ramp
5.9.4 Motor param
5.10 OpenLoopV/f 7
5.10.1 FIF managem
5.10.2 Freq setpt
5.10.3 f limit/ramp
5.10.4 Motor param
Speed control in the "Vector control" operating mode
5.11 Vector−Ctrl 0
5.11.1 Freq setpt
5.11.2 f limit/ramp
5.11.3 Motor param
5.11.4 Motor ident
l
Menu structure
Description Description
Operation with the system bus (CAN)
function module on FIF
Frequency setpoint via process data
channel (CAN−IN1.W2)
Set up system bus (CAN)
communication
Frequency setpoint configuration
Output frequency, acceleration time
and deceleration time configuration
Motor current control and motor
monitoring configuration
Operation with the fieldbus function
module on FIF (DRIVECOM control)
Frequency setpoint via process data
channel
Set up fieldbus communication
Frequency setpoint configuration
Output frequency, acceleration time
and deceleration time configuration
Motor current control and motor
monitoring configuration
Analog selection of frequency
setpoint via analog input 1 (AIN1)
Frequency setpoint configuration
Output frequency, acceleration time
and deceleration time configuration
Motor current control and motor
monitoring configuration
Motor parameter identification
7
93