Publicité
Les langues disponibles
Les langues disponibles
8
Parameterisation 9300 series
Change and save parameters
8
Parameterisation 9300 series
Change and save parameters
All parameters for controller setting or monitoring are saved in codes. The codes are
numbered and labelled in the documentation with a "C". Some codes store the parameters
in numbered subcodes", so that a clear parameter setting is ensured (e. g.: C0517 User
menu).
The codes are described in detail in the system manual of the drive controller.
)
Note!
Your settings have an effect on the current parameters in the main memory.
You must save your settings in a parameter set so that they are not lost when
the mains are connected.
If you only need one parameter set, save your settings as parameter set 1, since
parameter set 1 is loaded automatically after mains connection.
Step
1.
Select the menu
2.
Change to the code level
3.
Select code or subcode
4.
Change to the parameter level
5.
When SHPRG is displayed,
inhibit the controller
6.
Change parameter
7.
Accept the changed parameter
Display of SHPRG or SHPRG
8.
Enable the controller, if
required
106
Key sequence
z y Z Y
Z
y z
V
S
1)
Z Y
A
y z
B
T y
T z
p T V
p
−
Display
U
1)
l
Action
Use the arrow keys to select the desired
menu
Display of the first code in the menu
Display of the current parameter value
The drive coasts
Move cursor below the digit to be
changed
Change of digit
Quick change of digit
Confirm change to accept the parameter
Display "OK"
The parameter has been accepted
immediately
The drive runs again
EDK9371BC DE/EN/FR 3.1
Publicité
