Télécharger Imprimer la page

Jensen VM9223 Instructions D'opération page 14

Publicité

Les langues disponibles

Les langues disponibles

VM9223
DVD/VCD VIDEO OPERATION
NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking
brake is applied. If you attempt to play a DVD while the
vehicle is moving, the TFT screen displays the following:
"Warning !!! It is illegal to view video while driving or
operating a motor vehicle. Set parking brake to view
video." Rear video screens, if applicable, will operate
normally.
Insert/Eject Disc
To insert a disc, you must first press the
open the front panel and reveal the disc slot. Upon inserting a
DVD disc, DVD mode is entered and disc play begins. The
disc indicator light (9) dims when a disc is inserted.
NOTE: If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 4-digit code must be
entered and/or the disc must be authorized. When
parental code is entered using the remote, the play/
pause button must be pressed to confirm entry. (See
"General Sub-menu Features" on page 7.)
You cannot insert a disc if there is already a disc in the unit or
if the power is off.
NOTE: DVD-R and DVD-RW will not play unless the
recording session is finalized and the DVD is closed.
Ejecting a Disc
Press the
button (11) on the unit or remote control (35) to
eject the disc. The unit automatically reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will
remain off after the disc is ejected.
Reset the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism
operation occurs, press and hold the
unit or remote control (35) to reset the loading mechanism.
Normal operation resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted,
press the SRC button (6) on the front panel or remote control
(8) or touch the top left corner of the screen.
All manuals and user guides at all-guides.com
Using the Touch-Screen Controls
The touch key areas for DVD playback are outlined below.
button (4) to
A – Displays playing information
B – Displays on-screen control menu
Controlling Playback
To access the on-screen controls, touch the bottom 1/3 of the
screen (section B). Touch the 1/2 button to view a second
page of controls
1/2
button (11) on the
Stopping Playback
Touch the stop button ( ) on the screen or press the
button (20) on the remote control to stop DVD play.
Pausing Playback
Touch the play/pause button (
button on the remote control (18) to suspend or resume
||
disc play.
A
B
BACK
EQ
BACK
AUDIO
A-B
SUBTITLE
MENU
TITLE
2/2
DISP
) on the screen or press the
>
10
Slow Motion Playback
Press the
button on the remote control for slow
/BAND
motion playback (Slow Forward: 1/2, 1/4, 1/6, 1/7, Slow
Rewind: 1/2, 1/4, 1/6, 1/7).
Rewind
Press the << button (22) on the remote control or the <<
button on the screen to play the current title in reverse. Keep
pressing and releasing the button to increase the rate from
"2X" to "4X", "8X", and "20X".
Press
(18) on the remote control or touch the on screen
>/||
play button (>) to resume normal play.
Fast Forward Playback
Press the >> button (14) on the remote control or the >>
button on the screen to fast forward. Keep pressing and
releasing the button to increase the rate from "2X" to "4X",
"8X", and "20X".
Press
(18) on the remote control or touch the on screen
>/||
play button (>) to resume normal play.
Repeat Playback
Press the REPT button (7) on the remote control or the
button on screen to alter repeat mode according to the
following:
DVD: Repeat Chapter, Repeat TItle, Repeat Off
VCD (PBC Off): Repeat Single, Repeat Off
NOTE: For VCD play, the repeat function is not available
if PBC is on.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to
repeat.
Press the REPT A-B button (6) on the remote control to
set the start point (A) of the repeated section.
Press the REPT A-B button again once you reach the
desired end point (B) of the repeated section. The
selected portion of the DVD will now repeat
continuously.
Press the REPT A-B button again to cancel the A-B
section setting and stop repeat play.
Random Playback
With a DVD, VCD, or CD playing, press the RDM button (33)
>/
on the remote control to activate random playback and play
all chapters/tracks in random order. "Random on" appears on
the screen.

Publicité

loading