Helios AIR1 XH 1000 Notice De Montage Et D'entretien page 89

Installation and Operating Instructions
+
NOTE
Central ventilation units AIR1 XH
Labels have been attached to the modules for module arrangement, see Fig.10. The first number is the consecuti-
ve numbering and the second number is the total number of modules. The letter is the side that belongs together
in each case (side A to A, side B to B).
Before assembling the modules, apply gasket both surfaces of the heat exchanger module (AIR1 XH 3500, 4500, 5500,
7000, 8500), see Fig.11.
Prior to the assembly of the modules in the final position, they must be positioned as close together as possible. Only
the respective base frame may be used to pull the modules together.
1. Pull modules close together and tighten with screw (see Fig.12).
2. Connect the modules electrically using pre-assembled connector (see Fig.13).
Fig�11
Fig�12
Fig�13
10
EN
Fig�10