Tools And Supplies Required - SURE petcare SURE FLAP Cat Flap CONNECT Guide D'utilisation

Fitting your Cat Flap in a wall
Before you begin
Please contact a qualified builder to discuss the best location to fit your Cat Flap.
Remember some walls can be structural or there may be electrical wires, gas or
water pipes hidden within them which, if damaged, can cause serious problems.
We recommend that you do not attempt the work yourself unless you have relevant
experience. The job will be messy so protective clothing and eye-wear is a must and
when using power tools, please follow all safety instructions provided.

Tools and supplies required

Ruler
Blu tack
Sharp pencil
Vacuum cleaner
For wall installations, tunnel extenders can be stacked together to create a longer tunnel
for the Cat Flap. The existing tunnel is 70mm (2 3/ 4 ") long. Each tunnel extender adds
50mm (2") to the length of the tunnel.
Installation video tutorials (English speaking) can be found at surepetcare.com/support
Wall fitting features
External frame
2 External screw holes
23
All-weather tape
Wall plugs & screws
Cross head screwdriver
Clear all-weather sealant
Tunnel
4 Wall mounting screw holes
accessory
Cat Flap tunnel extenders
Electric drill & masonry bits
Protective clothing & eye-wear
Appropriate power tools for your wall
2
Internal screw holes
within the battery
compartment
Front frame
2
Internal screw holes
b
ehind the internal
screw covers