EUROM Siena Manuel D'utilisation page 44

by means of a timer and never connect it to a power supply that regularly switches on and
off.
Cleaning and maintenance
Always remove the plug from the socket and let the fireplace cool down before cleaning or
touching.
The Siena atmospheric fireplace does not need much maintenance. Always keep the in-
and outlet openings clean and dust-free. Use a soft cloth or a soft brush to clean the
outside of the metal case. The glass plate can also be cleaned with a soft cloth. Do not use
abrasive cleaning fluids or special glass cleaners!
If the device malfunctions, immediately remove the plug from the socket and take to a
service point. Do not carry out repairs yourself and always ask for original parts to be used.
If the fireplace is to be stored after the winter period, clean it, pack it in original packaging
if possible and store in a cool, dry and clean place. Make sure the fireplace is kept upright.
Problems and solutions
If the fireplace will not work check the electrical supply. Is the socket working properly?
Has the fuse blown?
If the fireplace stops working suddenly, it may mean that the overheating safeguard has
been triggered (see under 'Safeguards').
In the event of other defects, immediately switch the fireplace off, remove the plug from
the socket and consult a supplier or recognised electrician. Never carry out repairs
yourself as this invalidates the guarantee and may be dangerous!
Disposal
At its end of life, discard the device according to the local laws and regulations, or deliver
the device to your supplier.
44