EUROM Siena Manuel D'utilisation page 41

• Now you can start operating the stove by pressing the button to 900W (half output) or
1800W (full output). When the set temperature is above the ambient temperature, the
stove will start to heat (900W,1800W). The corresponding lights on the display are
turned on (900W-1 star,1800W-2 stars).
If you press the IC button, the stove will automatically choose the most suitable output.
The corresponding lights on the display are turned on (IC-AUTO).
• The thermostat will switch off the stove as soon as the stove reaches the desired
temperature and it will switch it on again if the ambient temperature drops.
• By pressing the 'dimmer' button (there are 5 positions), you can intensity or decrease
the flame effect of the stove.
• You switch off the stove by pressing the ON/OFF button. The temperature level that
you set will remain. However, if you switch on the stove once again, you will have to
reset the output.
• If you want to switch off the stove for a longer period, then also set the main switch on
O (OFF). The set temperature will now be erased. Finally remove the plug from the
socket.
Timer
❖ The stove has a built-in weekly timer, which allows you to set a weekly schedule for
switching on and off. You must first set the date and time; if you don't do that, then
the stove assumes that it is scheduled for Sunday at 00.00!
•
Press the ON/OFF button to switch on the stove.
•
Press on the DAY/TIME button; the day indicator will light up. Select the arrows Λ
and V for the current day and confirm this by pressing the DAY/TIME button again
(Sunday, Monday, etc.)
•
The hour indication will now flash. By pressing on the + and - buttons, you select
the current hour. Reconfirm by pressing on the DAY/TIME button.
•
The minutes indicator will now flash. By pressing on the + and - buttons, you select
the precise time. Confirm by pressing on the DAY/TIME button.
•
Day and time are now set.
❖ To set the weekly timer, take the following steps:
•
Ensure that the stove is switched on with the ON/OFF button.
•
Press on the TIMER SET button. The indication 01 on the display starts to flash,
indicating that you have selected the first timer setting (you can select 10 timer
settings). Confirm this by pressing once again on the TIMER SET button.
•
The day indicator will now flash (SUN). Choose the days when the stove must
operate (e.g., from Monday to Friday) by pressing + next to the days you have
selected and pressing - next to the days that you don't want to select. Use to
arrows to move to the next day. Press again on the TIMER SET button to choose
the days and confirm.
41