Publicité
Les langues disponibles
Les langues disponibles
Remote control:
A. ON/OFF button
B. Button for setting the time
C. + button
D. Erasing the time setting
E. Timer on/off button
F. Dimmer button
G. DAY and TIME button
H. - button
I. Automatic output selection
J. 900W button
K. 1800W button
Display:
1. Stand-by light
2. Day indicator
3. Temperature and thermostat setting
4. Time indicator and timer setting
Location and connection
•
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your
vendor for inspection or replacement.
•
Do not use the fireplace before it has been completely installed according to the
instructions and you have read the instruction booklet fully!
•
This device was designed to be permanently hung on a wall. Ensure the wall is sturdy,
completely vertical, is not sensitive to vibration and is not flammable. Make sure it is
not made of synthetic material and or covered with flammable material. Be aware of
pipes that may be contained within the walls when drilling holes.
•
Choose a suitable location for the fireplace, at least one metre from all obstructions,
walls and flammable materials (see safety instructions) and in the vicinity of a 16 Amp
(at least) fused, earthed electrical socket (protected by a 30 mA earth leakage circuit
breaker). This socket must be located to the right of the fireplace.
5. Lamps of 900W - 1800W - auto
6. Dimmer setting
7. Operating timer light
8. Timer ON & OFF setting
38
Publicité
