EUROM Siena Manuel D'utilisation page 37

- users - maintain the device.
- touch or move the device.
3. Never switch the device on if you have noticed damage to the device itself, the cable
or plug or if it does not work properly, makes strange noises, smells odd or you can
see smoke, or if it has fallen or shows any other signs of damage. Remove the plug
from the socket immediately. Take the entire device back to your supplier or a
recognised electrician to be checked and/or repaired. Always ask for original parts to
be used.
4. The device may only be opened and/or repaired by a competent and qualified
person. Do not carry our your own repairs as this could be dangerous! Repairs carried
out by unauthorised persons or changes made to the device could damage the
dust/waterproof capacity of the device and will nullify the guarantee and the
manufacturer's liability.
5. If the electrical cable is damaged, it must be replaced by the manufacturer, their
service department or somebody with similar qualifications in order to prevent
creating a hazard.
Failing to adhere to points 3, 4, 5, could lead to damage, fire and/or personal injury. They
will invalidate the guarantee and the supplier, importer and/or manufacturer shall not be
liable for the consequences.
Description
The SIENA comprises an atmospheric fireplace (containing a heating element and
ventilator which blows warm air out of the top of the fireplace), wall supports, a remote
control and this instruction booklet.
The atmospheric fireplace is covered with a rounded glass plate at the front. There is a
metal cabinet behind this which contains the atmospheric elements at the front, air grilles
at the sides and, on top, the grille which is used to blow out warm air and the operating
panel. The hanging bracket is located at the back and the technical aspects are housed
internally.
The wall supports must be attached to the wall so that the fireplace can be hung on them.
Screws, plugs, a spacer bracket and self-tapping screws are supplied.
There are four buttons on the remote control; one red and three black. The red button
switches the atmospheric screen on; the two upper black buttons are for setting heat
levels (900 and 1800 Watt respectively) and the lower black button (the dimmer) is used
to regulate the clarity of the screen.
37