EUROM Siena Manuel D'utilisation page 39

•
There must be at least 30 cm distance between the base of the fireplace and the
ground, however, you are advised to place the fireplace at a height of 60 cm. for the
best sight. There must be at least 20 cm distance between the fireplace and the side
walls, at least 100 cm. between the fireplace and the ceiling. Do not hang the device
directly under or in front of an electrical socket (see diagram 1).
•
The wall supports must be attached horizontally (use a spirit level!) to the wall.
Determine the location of the wall supports (take the above into account), mark the
location of the screws and drill 4 holes at the marked places using a 6 mm drill. Put the
plugs into the holes and then screw the wall supports to the wall. Be aware of pipes
that may be contained within the walls when drilling holes!
•
Attach the spacer bracket with both self-tapping screws underneath the fireplace in
the holes provided. The flat side of the bracket must be placed against the underside
of the fireplace; the other must rest against the wall so that the wall piece sticks out
under the fireplace (diagram 3). This bracket will be hidden from sight once the glass
screen has been installed.
•
Now hang the fireplace carefully on the central wall support with the hanging bracket
(see diagram 2). The bracket should not stick out from the support! The electrical
cable comes out at the right hand, lower side of the fireplace and must be placed out
of range of the heat.
•
Now mark the location at which the spacer bracket must be screwed to the wall.
Remove the fireplace from the wall, drill both holes and insert a plug. Hang the
fireplace on the bracket and screw the spacer bracket to the wall.
39