Télécharger Imprimer la page

Yamaha 200G Manuel D'utilisation page 90

Publicité

EMU00210
Engine
8 Check the engine and engine mounting.
8 Look for loose or damaged fasteners.
8 Check the propeller for damage.
EMU00214
OPERATION AFTER LONG PERIOD
OF STORAGE
(for Autolube system model)
When operating the engine after a long
period (12 months) of storage, proceed as
follows:
1) Use a 50 : 1 gasoline-oil mixture to
start the engine.
2) Start the engine. Leave it idling.
w
8 Do not touch or remove electrical parts
when starting or during operation.
8 Keep hands, hair, and clothes away
from flywheel and other rotating parts
while engine is running.
3) Watch for oil flowing through the oil
feed pipes. After any air in the oil
212013
lines has been expelled, YAMAHA
AUTOLUBE SYSTEM should supply
oil normally. If no oil has begun flow-
ing after 10 minutes of idling, consult
your Yamaha dealer.
cC
When operating the engine after a long
period of storage, be sure to take the
above steps; otherwise, engine seizure
may occur.
3-8
GB

Publicité

loading