Publicité
Les langues disponibles
Les langues disponibles
Super cool mode
This mode allows to cool and store a large quantity of food in the fridge compartment, and to
quickly cool drinks.
Scroll through the different temperatures until the wanted temperature for the Super cool
mode appears.
Press and hold the Fridge button (#2 on the control panel drawing) while the displayed
temperature is flashing, to activate the mode. A buzzer sounds, the mode is set.
Press the button until you return to the temperature at which you set the Super cool mode.
The Super cool light (# 5 on the control panel drawing) appears next to the temperature, the
mode is set.
During this mode:
Eco mode cannot be selected.
Super cool mode can be disabled by pressing and holding the Fridge button again. When
disabled, the selected setting values will proceed.
Eco mode
During periods of less frequent use or absence from home, such as holidays, Eco program can
provide optimum temperature while saving power.
Push Mode button (#3 on control panel drawing) until Eco symbol appears. Buzzer will
sound, mode will be set.
Temperature light (#1) will show "E".
Eco symbol and E will light till mode finishes.
During this mode:
Temperature may be adjusted.
Super cool mode can be selected, but Eco mode is automatically cancelled.
To disable, press Mode button. When Eco mode will be disabled, the selected setting
values will proceed.
Screen saving mode
This mode saves energy by switching off all control panel lighting when the panel is left inactive.
Screen saver mode will be activated automatically after 30 seconds.
If you press any button while the lighting of the control panel is off, the current settings will
reappear on the display to let you make any change you wish.
If you do not cancel the screen saving mode or press any button for 30 seconds, control
panel remains off.
To disable the Screen saving mode
Press any button to activate the keys and then press and hold the Mode button (#3 on
control panel drawing) for 3 seconds.
To reactivate Screen saving mode, press and hold the Mode button (#3 on control panel
drawing) for 3 seconds.
Door open alarm
The alarm will sound when door is left open for a long time. It switches off when door is
closed.
Publicité
