USE & TIPS
"COLD AREA" indicator
The sign opposite can be found in your fridge.
It clearly shows the coldest zone of your appliance, where the temperature is lower than
or equal to +4°C.
A temperature gauge in this zone allows you to check the settings of your fridge.
OK
Warning!
If the door of the fridge is left open for too long, the temperature inside the fridge will rise. Check the
temperature gauge within 30 seconds after opening the door to make sure that the reading is correct.
Temperature setting
Control Panel
Buttons
2 – Press 2 to adjust the temperature of the fridge: 8, 6, 5, 4, 2°C, and to activate the Super
cool mode
3 – Press 3 to select Eco mode.
Lights
1 – Show the temperature of the fridge.
4 – Eco mode light.
5 – Super cool mode light.
6 – Alarm light: appears when there is an error on one of the components such as defrost
heater, compressor or when the sensor is no longer connected.
Setting
Press Mode button (#3 on control panel drawing) to select the mode wanted.
Press Fridge button (#2 on control panel drawing) to adjust the setting temperature. The
temperature of the fridge is automatically at 4°C.
Adjust the thermostat
Temperature correct