Publicité
Les langues disponibles
Les langues disponibles
❖ Do not use the pump if safety devices are damaged or used. Never
deactivate safety devices.
❖ The pump must be used with 220-240 V AC current, as indicated on
the rating plate.
❖ Do not use the power cable for carrying the pump or for unplugging.
❖ Make sure that electric connections are protected from humidity.
❖ Avoid dry-running of the pump. Never use the pump if suction hose is
obstructed. Use a device for lack of water detection.
❖ It is strictly forbidden to pump corrosive, easily combustible, aggressive
or explosive liquids (such as gasoline, petroleum or nitro thinner),
saltwater and food.
❖ The temperature of the liquid must not exceed 35°C.
Golden rules for care
4) Check the filter of the pump (9) regularly, and clean it with clear
water if necessary.
5) When temperature is close to 0°C, empty the pump housing by
using the drainage cap (1), and protect the pump of the frost.
6) In case of long period of inactivity, store the pump in a dry, well
ventilated place, protected from frost
When disabling the pump
> Unplug the pump form the mains
> Unscrew the drainage cap (1) to empty the water in the pump
> Store the pump where it is protected from frost
Bring into service
> Follow the steps of the chapter "Getting started
IMPORTANT : For your safety, read the
instructions
"
GB
Publicité
