EuroLite TS-2 Mode D'emploi page 25

Display and Function Buttons
Press the Function Button and select from the functions F1 – F6.
F1 - Stand Alone operation
In the Stand Alone mode, the TS-2 can be used without controller. Disconnect the TS-2 from the controller
and call up the internal program (F1).
• Press the Function button and select „F1".
• Press the Up button to select "y" if you wish to enable this function or press the Down button to select "n"
if you don't.
F2 - Pan Reverse
With this function you can reverse the Pan-movement.
• Press the Function button and select „F2".
• Press the Up button to select "y" if you wish to enable this function or press the Down button to select "n"
if you don't.
F3 - Tilt Reverse
With this function you can reverse the Tilt-movement.
• Press the Function button and select „F3".
• Press the Up button to select "y" if you wish to enable this function or press the Down button to select "n"
if you don't.
F4 - Lamp on/off
With this function you can switch the lamp on or off via DMX channel 5.
• Press the Function button and select „F4".
• Select "n" if you wish to switch the lamp on and off or "y" if you wish to let the lamp shine permenantly.
F5 - Reset
With this function you can reset the device via the Control Board.
• Press the Function button and select „F5".
• Press the Up button to select "y" if you wish to enable this function or press the Down button to select "n"
if you don't.
• During the Reset, the motors are trimmed and the device is ready for use afterwards.
F6 – Music Mode
With this function you can call up sound control for the device.
• Press the Function button and select „F1".
• Press the Up button to select "y".
• Press the Function button and select „F6".
• Press the Up button to select "y".
• Press the Enter button to save.
25/54 51785765_V_1_4.DOC