Publicité
Les langues disponibles
Les langues disponibles
(11) Fuse
(12) Power supply
(13) Attachment eyelet
(14) Power switch
(15) Mounting bracket
(16) Fixation screw
(17) DMX-Out socket
(18) DMX-In socket
INSTALLATION
Installing/Replacing the lamp
For the installation, you need one EFR 12 V/100 W GZ-6.35 lamp.
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
21/54
51785765_V_1_4.DOC
Publicité
