Makita EM3400L Instructions D'emploi D'origine page 6

Never straighten or weld damaged cutting tools.
– Pay attention to the environment. Avoid unnecessary throttle operation for
less pollution and noise emissions. Adjust the carburetor correctly.
– Clean the equipment at regular intervals and check that all screws and nuts
are well tightened.
– Never service or store the equipment in the vicinity of naked flames.
– Always store the equipment in locked rooms and with an emptied fuel tank.
– When cleaning, servicing and storing the equipment, always attach the cover
to the metal blade.
Observe the relevant accident prevention instructions issued by the relevant trade associations and by the insurance companies.
Do not perform any modifications to the equipment as this will endanger your safety.
The performance of maintenance or repair work by the user is limited to those activities as described in the instruction manual. All other work is
to be done by an Authorized Service Agent. Use only genuine spare parts and accessories released and supplied by MAKITA.
Use of non-approved accessories and tools means increased risk of accidents.
MAKITA will not accept any liability for accidents or damage caused by the use of non-approved cutting tools and fixing devices of cutting tools,
or accessories.
First Aid
In case of accident make sure that a first-aid box is available in the vicinity of
the cutting operations. Immediately replace any item taken from the first aid box.
When asking for help, please give the following
information:
– Place of accident
– What happened
– Number of injured persons
– Kind of injuries
– Your name
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine: Petrol Brushcutter
Model No./ Type: EM3400U, EM3400L
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
They are manufactured in accordance with the following standard or standardized documents:
EN ISO 11806-1
The technical file in accordance with 2006/42/EC is available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
The conformity assessment procedure required by Directive 2000/14/EC was in accordance with annex V.
EM3400U (With nylon cutting head):
Measured Sound Power Level: 109.1 dB
Guaranteed Sound Power Level: 110 dB
EM3400U (With cutter blade):
Measured Sound Power Level: 105.8 dB
Guaranteed Sound Power Level: 106 dB
EM3400L (With nylon cutting head):
Measured Sound Power Level: 110.4 dB
Guaranteed Sound Power Level: 112 dB
EM3400L (With cutter blade):
Measured Sound Power Level: 105.9 dB
Guaranteed Sound Power Level: 107 dB
All manuals and user guides at all-guides.com
6. 6. 2014
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
6