Bertazzoni REF75PIXL Guide D'installation page 34

4. PANELS MOUNTING
4.5 Mounting panels to the door and
the drawer of Integrated units
Operate as follows:
> Ensure the top adjustment L-brackets are alig-
ned and inserted into the cavities at the top of the
door [ 6 ].
> At this point, alignment between the panel and
adjacent cabi-nets can be adjusted using the ali-
gnment brackets and small brack-ets
> Vertical alignment: tighten or loosen the screw in
the brackets to raise or lower the panel
> Depth alignment: working from the inside of the
door, after lift-ing up the magnetic seal, adjust the
panel position so it is closer to or further away from
the door using the holes
in position using the holes
Once the front panel has been ad-justed,
check that the gasket has been repositio-
ned correctly to as-sure the door/drawer
are closing correctly and avoid operational
er-rors of the unit.
14
[ 7 ] [ 8
and
[ 9 ]
[ 10 ] and then fix the panel
[ 11 ].
www.universal.bertazzoni.com
].
6
7
8
9
10
11