Handling And Operation; Work Assignments; Servicing And Maintenance - Kerbl BigBag Mode D'emploi

The equipment is part of the design and may differ from your design!
Design and function
• The dosing device is made of high-strength and fully galvanised steel.
• The barbed hooks are made of polyurethane and are riveted to the dosing device.
• On the slider there are handles that serve as protection and make it easier to grip.

6. Handling and operation

Read carefully. If you have any questions or if you do not understand the instructions, please contact the manufacturer to
avoid operating errors.
• When not in use, the safety cap must be present on the product.
• Make sure the substrate is stable.
• Never lift the Big Bag on a slope.
• The driving speed must always be adapted to the surrounding conditions.
• Avoid sudden turns when driving uphill or downhill and crossing a slope.
• Driving behaviour, steering and braking ability are influenced by the devices and ballast weights.
• Therefore ensure sufficient steering and braking power!
Handling the packing system
Direct unauthorised persons out of the hazard area below the Big Bag. Make a visual inspection of the entire floor area around the front
loader/forklift.

6.1 Work assignments

General safety and operating instructions
Below, some general safety and operating instructions for the operation of the dosing unit are summarised repeatedly for ease of understanding:
• Before commissioning, move all attached protective devices into a protective position!
• Put all of the equipment in the transport position before travelling by road!
• During use, no persons may be present in the hazard area!
• Observe the manufacturer's instructions!
• Keep children away!
• Secure the carrier vehicle against rolling away when parking!
Operation
1. Place the dosing device on a firm and stable surface. Lift the Big Bag with the loops provided
for this purpose, e.g. using a front loader, and position it centrally over the dosing device.
2. Lower the Big Bag slowly and carefully so that the dosing device can slowly penetrate the Big
Bag. As soon as the dosing device has engaged, the Big Bag can be lifted again.
If the Big Bag is set down too quickly or the ground is uneven  no warranty!
3. To make opening and closing the device easier, it is recommended to pull it down a little by
hand until it is securely seated.
4. The dosing device's simple opening and closing mechanism enables effortless dosing and
emptying of the disposable Big Bag. The slider is opened towards the operator.

6.2 Servicing and maintenance

Read this section carefully before starting maintenance! Below you will find information on
troubleshooting and machine maintenance. Regular maintenance according to the maintenance schedule
is an essential prerequisite for efficient operation.
Proper maintenance
Proper maintenance helps to ensure smooth and efficient use of the product. Operating personnel
can perform this work after appropriate training.
28
1
2
3
4