Feature Locations; First Time Usage; Initial Operation; Charging The Camera And Receiver - Kerbl 322080 Guide D'utilisation

Feature Locations

1. Camera
Lens
Infrared-LEDs
2. Receiver
Bracket
Video out for TV
Power socket (5V)

INITIAL OPERATION

Charging the Camera and Receiver

1. Insert a Li-battery into the battery compartment, matching polarities.
2. Connect the camera/receiver with the auto cigarette lighter using the charging cable. Your camera and receiver are
being charged. A full charge will take about 4 hours each for the camera and for the receiver respectively.
Note: You need to remove the cover on the camera before charging
3. The camera is operational during charging. Adjust the Power ON/OFF/Channel switch-button to channel 1, then you
can use it.
Camera
4. The receiver is operational during charging.
Weather
proof cover
Antenna
Magnetic Stand
LCD display
Volume
ON/OFF button
Channel indicator
Channel switch
Speaker
18
#1088
Power Jack
LED Indicator
Antenna
Power ON/OFF
Channel Switch
Wireless 2.5" LCD monitor
(#322032)