Information For Users; Liability And Damage; Duty To Provide Information; Basic Safety Instructions - Kerbl BigBag Mode D'emploi

Read and pay attention to these operating instructions before initial commissioning!
Keep for future reference!

1. Information for users

Representation of safety instructions
Danger!
Imminent danger which leads to serious physical injury or death.
Warning!
Potentially dangerous situation that could lead to serious injury or death.Keep away from the area immediately below the Big
Bag.
Caution!
Potentially dangerous situation that could lead to minor physical injury.Also a warning about damage to property.
Note!
Potentially harmful situation that could damage the product or an object nearby
Important
For usage instructions and other useful information.
Risk of hand injuries
Risk due to raised load

1.1 Liability and damage

The product may only be operated by persons who are familiar with the operating instructions, the product and the national legislation,
regulations and requirements pertaining to work, safety and accident prevention. We accept no responsibility for any physical or material damage
caused by untrained personnel, failure to observe the regulations pertaining to work, safety or accident prevention. On the basis of the
information provided in these operating instructions, Albert Kerbl GmbH shall not be held liable for any direct damage or consequential damage
arising from improper operation or maintenance. For your own safety, only use original spare parts and accessory products. Albert Kerbl GmbH
accepts no responsibility for the use of other products and resulting damage. The information, illustrations and descriptions in this manual cannot
be used to make any claims for changes to products already delivered.

1.2 Duty to provide information

These operating instructions should be regarded as part of the dosing device. Even if the packing system is subsequently passed on by the
customer, the operating instructions must also be included and the recipient must be instructed with reference to these requirements. Only the
procedures specified in the operating instructions are safe.
• Section 2, "Basic safety instructions", must read in full and complied with before using the product for the first time.
• Before starting work, the relevant sections of the operating instructions must be read and complied with.
• The operating instructions must be kept in a place accessible to machine users.

2. Basic safety instructions

Failure to comply with the safety instructions and warning information can result in danger to persons, the environment and
material assets.
• The dosing device must be checked for obvious damage and defects after every day of use!
• Only use the dosing device if all of the safety and protective devices are fully installed and functional!
• Before every commissioning operation, check that the locking mechanisms fit perfectly and are secure.
22