STEP 1
To assemble the slides, attach the
cross bar to the feet (See Figure 1).
STEP 2
Attach the left and right slides
respectively to the top of the feet.
Push down until you feel a "snap"
(See Figure 2).
STEP 3
Decide which side you want the
sidecar on. If it needs to be on
the right side, proceed to Step 4,
otherwise move on to Step 9 (See
Figure 3). Be mindful of walls or
appliances that might obstruct
access to the cubby or 8 L bins
when choosing your orientation.
STEP 4
Loosen the lock nuts (
⁄
" wrench)
3
8
and T-nut screws inside the front wall
of the unit and remove all the door
mount hardware (See Figure 4).
STEP 5
Slide the door mount brackets
onto the opposite side of the wood
chassis and fix in place with the lock
nuts, washers, and T-nut screws you
removed in the previous step (See
Figure 5A and 5B).
2
FIG. 1
FIG. 2
FIG. 3
Sidecar
FIG. 4
Lock nut
FIG. 5A
Customer Service: 800-626-1126 | rev-a-shelf.com
FIG. 5B