Publicité
Liens rapides
MAPLE DRAWER SYSTEM
TOOLS REQUIRED:
#2
7
64
#2
ESTIMATED ASSEMBLY TIME:
20 MIN
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
NOTE:
The maple drawer system
is designed to use either
BLUMOTION under mount
slides or Grass Elite 7523-
19/550/533 undermount
slides.
4WTCD-30 & 4WTCD-36 with
BLUMOTION slides require an
additional stabilizer bar which
is included in the kit purchase.
Parts List
No.
Description
A
Drawer Unit
B
Figure 8 Mounting Brackets
C
#6 x 1/2" Pan Head Screws
D
#8 x 5/8" Wood Screws
E
Blum SC Slides
F
Rear BLUM Brackets (FF only)
G
BLUM Release Triggers
*Appearance varies depending on unit purchased
**Depending on unit purchased
***4 for frameless cabinets, 8 for face frame
****8 for frameless cabinets, 4 for face frame
THE MAPLE DRAWER SYSTEM (4WTCD & 4VDO) IS
DESIGNED TO USE UNDER MOUNT FULL-EXTENSION
DRAWER HARDWARE ONLY. IF YOU ARE REPLACING A
DRAWER BOX THAT DOES NOT CURRENTLY USE FULL-
EXTENSION (FX) OR PREMIUM GUIDE (PG) HARDWARE
YOU WILL NEED TO ORDER A DRAWER GUIDE KIT (DGK).
INSTALLATION INSTRUCTIONS: MAPLE DRAWER SYSTEM
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
A
Qty.
1*
2 or 4**
4 OR 8***
8 OR 4****
B
2
2
2
E
G
JUST ADD
YOUR OWN
DRAWER
FRONT!
C
D
F
SCALE 0.500
SCALE 0.500
I-4WTCD-0419
Publicité
Manuels Connexes pour Rev-A-Shelf RS4WTMD.24HSC.1
Sommaire des Matières pour Rev-A-Shelf RS4WTMD.24HSC.1
- Page 1 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 MAPLE DRAWER SYSTEM JUST ADD TOOLS REQUIRED: YOUR OWN DRAWER FRONT! Parts List Description Qty. Drawer Unit Figure 8 Mounting Brackets 2 or 4** ESTIMATED ASSEMBLY TIME: #6 x 1/2” Pan Head Screws...
- Page 2 Be careful to not drill through the drawer front. Secure Single and double drawer units both shown the drawer box to the drawer front using the figure 8 brackets and screws provided in the pack (See Fig. B-3). Customer Service: 800-626-1126 | rev-a-shelf.com...
- Page 3 STEP 4 If you have 30” or 36” combination drawer box, either face frame or frameless, refer to the Blum lateral stabilizer bar instruction sheet included in the stabilizer bar kit. FIG. C 13/16” STEP 5 (21 mm) Face frame only: Attach the rear Blum brackets on the back of the cabinet using (2) #8 x 5/8”...
- Page 4 Fully open and close the drawer several times to test functionality. The drawer box can be removed by squeezing the arms on the release triggers and pulling forward. 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 Customer Service: 800-626-1126 | rev-a-shelf.com...
-
Page 5: Sistema De Cajones De Arce / Système De Tiroirs En Érable
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 INSTRUCCIONES DE INSTALACIÓN / LES INSTRUCTIONS D’INSTALLTION SISTEMA DE CAJONES DE ARCE / SYSTÈME DE TIROIRS EN ÉRABLE ¡SOLO AÑADA SU HERRAMIENTAS REQUERIDAS: PROPIO FRENTE DE CAJÓN! OUTILS REQUIS: AJOUTEZ VOTRE PROPRE FAÇADE... - Page 6 à l’arrière de la façade de tiroir. Veillez à ne pas percer la façade du tiroir complètement. Fixez le bloc-tiroir à la façade à l’aide des supports en 8 et des vis fournis dans l’emballage (voir fig. B-3). Customer Service: 800-626-1126 | rev-a-shelf.com...
- Page 7 PASO 4 / ÉTAPE 4 Si tiene una caja de cajones combinada de 30 “ o 36 “, ya sea con marco o sin marco, consulte la hoja de instrucciones de la barra estabilizadora lateral Blum incluida en el kit de barra estabilizadora.
- Page 8 Le tiroir peut être retiré en appuyant sur les languettes des déclencheurs et en tirant vers l’avant. 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 Customer Service: 800-626-1126 | rev-a-shelf.com...