Fault Table Part 2 - Wetrok Master Sweep 97 Plus Manuel D'utilisation Original

Troubleshooting

8.2 Fault table Part 2

Fault
EN
Sweeping result is insufficient
54
Cause
Sweeping lip is missing, loose or worn
Plate broom pressure too high
Heavy wear and tear of plate brooms
Sweeping container is full
Inappropriate use of sweeping machine
according to information in Chapter 2.2
Section "Inappropriate use"
Remedy
Replace sweeping lip
Set height adjustment. See Chapter 7.2
in Section "Height adjustment of the plate
brooms"
Exchange plate brooms
Empty the sweeping container. See Chapter
7.7 Section "Empty sweeping container"
Use suitable cleaning device or cleaning
agent.