Pulsar PRO POWER SHARING Mode D'emploi page 6

GETTING STARTED
Power Sharing Overview
Key Features
Technical notes
Important Only the PUP2 Pulsar Plus model is compatible with Pulsar Pro on the same Power
Sharing network. The PUP1 Pulsar Plus model is not compatible on the same Power Sharing
network.
•
Compatible with all EVs.
•
No additional equipment required (only
communication cabling and conduit).
•
No Internet connection required.
•
Default minimum power delivery, even if a
charger loses connection to the shared network.
•
No subscription fees or recurring costs.
•
Can be used to limit amperage on a shared
branch circuit when allowed by the applicable
electrical code.
•
Maximum number of chargers: 50.
•
Checking with local code may also be a
requirement.
•
Compliant with NFPA 70 NEC Article 625 as an
Automatic Load Management System (ALMS).
6