Pulsar PRO POWER SHARING Mode D'emploi page 15

SETTING UP - PUP3
Primary Charger
Completing System Configuration with myWallbox
If this is the first time you have connected to any of the installed chargers,
you will need to add the chargers to your myWallbox account.
1.
Launch the
myWallbox app
on a Bluetooth-
enabled mobile
device and
log in to the
account.
4.
Repeat Steps 2 and 3 for each charger you are adding to the Power
Sharing system.
2.
On the home
screen, select
"I already have
a charger". If
adding additional
chargers, click the
"+" icon.
3.
On the "Add Charger"
screen, insert the serial
number and UID for the
charger you are adding.
Ensure you set the
correct state/province
location, and click
"Add".
15