Publicité
Les langues disponibles
Les langues disponibles
GETTING STARTED
Power Sharing Overview
30 A
30 A
6,9 kW
60 A
Power Sharing allows you to connect two or more Wallbox chargers
(up to 50 total) on a common electrical circuit and dynamically balance
the power available to each charger. As vehicles are connected to or
disconnected from chargers in a Power Sharing system, or as vehicle
batteries complete their charging cycles, the system will automatically
adjust the power available to each charger (and vehicle) as the power
supply and demand changes.
The Power Sharing system ensures that the total power used at peak
demand does not exceed the configured amperage, while simultaneously
ensuring the maximum available power (at least 6 Amps, up to the
maximum set rating of each charger) is available to each connected
vehicle. If connected chargers are already utilizing the maximum available
power and additional vehicles are then connected to chargers in the
system, those vehicles will be automatically queued for charging as soon
as the minimum amount of power is available to begin charging.
Installation and configuration of a Power Sharing system requires
additional steps and materials as described in this document. As this
process involves high-voltage equipment, we require you to engage a
qualified electrician to conduct and complete this set-up.
0 A
6,9 kW
20 A
20 A
6,9 kW
4,6 kW
20 A
6,9 kW
0 kW
4,6 kW
4,6 kW
60 A
5
Publicité
