Pulsar PRO POWER SHARING Mode D'emploi page 17

SETTING UP - PUP3
Primary Charger
Note that you only will configure the PRIMARY charger as described into the myWallbox app.
No additional configuration is needed for the Secondary chargers.
Once each charger in the system has been powered on and configured,
you can view the status of each charger via the myWallbox app. As a
reminder, the status screen for Secondary chargers will appear different
from that of the Primary charger as only the Primary charger can adjust
the system settings.
Reviewing the status of each charger can reveal issues with the
installation or provide insight as to why a charger is not charging at its
maximum current.
App Settings
Status: Primary unit
App Settings
Status: Secondary unit
App Charger
Dashboard:
Power Sharing status
17