Melitta F300-100 Guide D'utilisation page 61

9 Preparing hot water
Prerequisite: The appliance must be ready for operation (see „Switching on
and off" on page 52).
Take off the milk canister and place a tall vessel under the milk shower.
Turn the rotary switch for the milk shower (Fig. A, no. 11) clockwise to
•
open the milk shower.
→ The symbol for the milk shower
water flows out of the milk shower and into the vessel. You can conclude
this process at anytime by closing the milk shower.
• Turn the rotary switch for the milk shower anti-clockwise to close the
milk shower.
• Repeat the process if the desired quantity of hot water has not been
reached.
58
Heft_Lattea_EU_2_3.indd 58
is flashing. Approximately 90 ml of hot
09.04.2014 14:04:19