Melitta F300-100 Guide D'utilisation page 57

→ The symbol for the milk shower
under the milk shower.
• When water is no longer flowing out of the outlet and the symbol for the
milk shower
anti-clockwise to close the milk shower.
→ Subsequently, the standby symbol
illuminated. The appliance is ready for operation and water hardness is
automatically set to hardness level 1.
Notes
– The Melitta
period of time. We therefore recommend storing the Melitta
filter in the refrigerator in a glass of water when the appliance will not be in
use for extended periods.
– After inserting the Melitta
be washed out of the filter the first time the appliance is rinsed out. This
can cause the rinse water to appear slightly grey in colour. The water will
clear again subsequently.
54
Heft_Lattea_EU_2_3.indd 54
is illuminated, turn the rotary switch for the milk shower
Claris water filter should not remain dry over an extended
® ®
Claris
® ®
is flashing. Water runs into the vessel
and bean symbols
water filter, excess active charcoal will
will be
Claris water
® ®
09.04.2014 14:04:19