Operating Modes - Fritz! Box 7590 Guide Rapide

Security
z Operate the FRITZ! Repeater 2400 in
a dry place that is free of dust and
protected from direct sunlight, and
provide for sufficient ventilation.
z The FRITZ!Repeater 2400 is intended
for indoor use only. Never let liquids
get inside the housing.
z Insert the FRITZ!Repeater 2400 into an
electrical outlet that is easy to reach.
z Do not open the FRITZ!Repeater 2400
housing. Opening and/or repairing the
device can present a hazard.
z
Unplug the FRITZ!Repeater 2400 from
the outlet before cleaning. Clean the
device using a moist cloth.
6
The FRITZ!Repeater 2400
The FRITZ! Repeater 2400 is a wireless
repeater that extends the range of your
wireless network.
This quick guide presents the most
important instructions for starting
operation with your FRITZ!Repeater 2400.
A PDF manual with descriptions of all
functions and instructions is available on
our website en.avm.de/service.
The FRITZ!Repeater 2400 supports
Mesh WiFi. Thanks to Mesh WiFi, the
FRITZ!Repeater combined with a
FRITZ!Box with FRITZ!OS 7
automatically adopts the FRITZ!Box's
wireless LAN settings, receives its
updates via the FRITZ!Box, and its
wireless LAN performance is
optimized. For more information on
Mesh WiFi, see the PDF manual and
our website at en.avm.de/mesh.
The FRITZ!Repeater 2400 has a user
interface which you can open in a web
browser on all connected devices.
Please check regularly to see whether
updates are available for your
FRITZ!Repeater 2400.

Operating Modes

The FRITZ!Repeater 2400 can work in two different operating modes:
Wireless Bridge (Preset)
In "wireless bridge" access mode, the FRITZ!Repeater and your FRITZ!Box (router) are
connected via wireless LAN. The FRITZ!Repeater can expand the network by offering
connections to computers and other network devices via wireless LAN or LAN cable.
N 1
FO
LAN Bridge
In "LAN bridge" access mode, the FRITZ!Repeater and your FRITZ!Box (router) are
connected by LAN cable. The FRITZ!Repeater can expand the network by offering
wireless connections to computers and other network devices.
If you would like to connect the repeater with your FRITZ!Box by cable, configure "LAN
bridge" access mode in the user interface of the FRITZ!Repeater.
WiFi
N 1
FO
WiFi
Connect
LAN
WiFi
Connect
LAN
7