Abus FU8165 Instructions D'installation page 29

Delivery state of key-switch
User code "1234" is programmed
All 4 partitions are selected
Signal tones are activated
Reception time of 10seconds is programmed
8.1. Wireless key switch operating mode
Press the program button (15) once enter this submenu. The display shows
. Press and hold the button until the
The current programming is displayed after about 1 second (e.g.
can now change this number by pressing the button several times. The
operating mode for operation as an arming station (FU5140) and wireless
info module (FU8200) is activated when a
operating mode, operation as a 2WAY arming station (FU8110), on the
wireless key switch.
When the required value is reached, it can be saved by pressing the button
and holding it until
Note:
Operating mode
wireless info module (FU8200), is compatible with all Secvest
versions.
Operating mode
compatilbe with Secvest 2WAY.
appears on the display.
, operation as an arming station (FU5140) and
, operation as a 2WAY arming station (FU8110), is
29
appears on the display.
is displayed. A
). You
shows the