HIKOKI CD 3605DB Mode D'emploi page 12

English
○ For transportation abroad, you must comply with
international law and the rules and regulations of the
destination country.
○ If the BSL36B18 is installed in the power tool, the power
output will exceed 100 Wh and the unit will be classifi ed
as Dangerous Goods for freight classifi cation.
Power Output
Wh
2 to 3 digit number
USB DEVICE CONNECTION
PRECAUTIONS (ONLY WITH
UC18YSL3 CHARGER)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
○ Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
○ When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
○ There may be an occasional pause during USB
recharging.
○ When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
○ It may not be possible to charge some USB devices,
depending on the type of device.
NAMES OF PARTS (Fig. 1–Fig. 25)
Switch
Switch lock
Cutting depth lever
Gear cover
Lower guard
Bolt
Washer (B)
Saw blade
Guide slit on the Base
Base
Lock lever
Guide fastener wing bolt
LED light
Battery
Hex. bar wrench
Handle
Guide
Mode selector switch
Silent mode indicator lamp
Battery level indicator switch
Battery level indicator lamp
Lighting mode switch
Lighting mode indicator lamp
Cleaner
Hose
Hose tip
Hose attachment port
Joint
Washer (A)
Saw cover
Dust cover
Rubber cap
Push button
Dust box
Mark of dust box
Sub handle
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CD3605DB: Cordless Metal Cutting Saw
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
12