Chauvet Professional MAVERICKMK2WASH Mode D'emploi page 44

IP address
In Manual IP Mode, the IP address must be assigned through the product menu. To set the IP address in
Manual IP Mode, do the following:
1. Navigate to the Network settings
2. Use <UP> or <DOWN> to select Ip, or touch the display where it says Ip.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Set the IP address (from 000.000.000.000 to 255.255.255.255) with one of the following methods:
• Through the touchscreen:
a. Touch the display where it shows the byte (set of three numbers) to be changed.
b. Use the number pad on the display to enter the desired number.
c. Repeat until the IP address is set as desired.
• With the buttons:
a. Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed).
b. Use <UP> or <DOWN> to increase or decrease the value.
c. Repeat until the IP address is set as desired.
5. Press <ENTER>.
Subnet mask
In Manual IP Mode, the Subnet Mask must be assigned through the product menu. To set the Subnet Mask
in Manual IP Mode, do the following:
1. Navigate to the Network settings
2. Use <UP> or <DOWN> to select SubMask, or touch the display where it says SubMask.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Set the Subnet Mask (from 000.000.000.000 to 255.255.255.255) with one of the following
methods:
• Through the touchscreen:
a. Touch the display where it shows the byte (set of three numbers) to be changed.
b. Use the number pad on the display to enter the desired number.
c. Repeat until the Subnet Mask is set as desired.
• With the buttons:
a. Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed).
b. Use <UP> or <DOWN> to increase or decrease the value.
c. Repeat until the Subnet Mask is set as desired.
5. Press <ENTER>.
In DHCP or Static IP Mode, the IP and SubMask menu settings have no effect on the
product.
Pan/tilt orientation
To set whether the pan or tilt orientation is normal or inverted:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Pan Reverse or Tilt Reverse, or touch the display where it says
the desired setting.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted
orientation), or touch the display where it says the desired option.
5. Press <ENTER>.
Zoom orientation
To set whether the zoom goes from wide to narrow or from narrow to wide, follow the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Zoom Reverse, or touch the display where it says Zoom
Reverse.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (wide to narrow) or YES (narrow to
wide) or touch the display where it says the desired option.
5. Press <ENTER>.
Page 29 of 197
menu.
menu.
menu.
menu.
Maverick MK2 Wash User Manual Rev. 15
Operation