Télécharger Imprimer la page

Chauvet Professional MAVERICKMK2WASH Mode D'emploi page 31

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Operation
Dual control movement start address
To set the starting address of the Dual Control Movement mode, set the Protocol, then follow the
instructions below:
1. Use <UP> or <DOWN> to select Start Address, or touch the display where it says Start Address.
2. If using the buttons instead of the touchscreen, press <ENTER>.
3. Enter the starting address (1–512) with one of the following methods:
Type the address number using the number pad that shows on the touchscreen display.
Using the buttons (or the button icons on the sides of the display):
a.
Use <LEFT> or <RIGHT> to select the digit to be altered.
b.
Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c.
Repeat until the address is set as desired.
4. Press <ENTER>.
Dual control movement universe
To set the Universe address of the Dual Control Movement mode when using Art-Net™ or sACN, set the
Protocol
to ArtNet or sACN, then do the following:
1. Use <UP> or <DOWN> to select Universe, or touch the display where it says Universe.
2. If using the buttons instead of the touchscreen, press <ENTER>.
3. Enter the universe address (0–255) with one of the following methods:
Type the address number using the number pad that shows on the touchscreen display.
Using the buttons (or the button icons on the sides of the display):
a.
Use <LEFT> or <RIGHT> to select the digit to be altered.
b.
Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c.
Repeat until the address is set as desired.
4. Press <ENTER>.
Dual control pixels
The Pixels protocol controls the individual output of the LEDs. Choose from DMX, Art-Net™, sACN, or
Kling-Net. In this mode, the three personalities available are: Basic (36 channels), Standard
(48 channels), and Advanced (96 channels).
Dual control pixels protocol
To select the Dual Control Pixels protocol, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Control Settings, or touch the display
where it says Control Settings.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Dual Control, or touch the display where it says Dual Control.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP> or <DOWN> to select Pixels, or touch the display where it says Pixels.
7. If using the buttons instead of the touchscreen, press <ENTER>.
8. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from DMX, ArtNet, sACN, or Kling-Net, or
touch the display where it says the desired protocol option.
9. If using the buttons instead of the touchscreen, press <ENTER>.
Dual control pixels personality
To select the Dual Control Pixels personality, set the Protocol, then do the following:
1. Use <UP> or <DOWN> to select Personality, or touch the display where it says Personality.
2. If using the buttons instead of the touchscreen, press <ENTER>.
3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from Basic (36-channel), Standard
(48-channel), or Advanced (96-channel), or touch the display where it says the desired
personality.
4. If using the buttons instead of the touchscreen, press <ENTER>.
ArKaos Kling-Net can only be assigned the Basic and Standard Pixels personalities.
Maverick MK2 Wash User Manual Rev. 15
Home Screen
shows on the display. Press <ENTER>.
Page 16 of 197

Publicité

loading