Chauvet Professional MAVERICKMK2WASH Mode D'emploi page 29

Operation
Main Level
Channel
Sys Info
Information
(cont.)
(cont.)
Protocol Configuration
The Maverick MK2 Wash can be set to respond to DMX, WDMX, Art-Net™, sACN, Kling-Net, or a
combination of those protocols. The protocol configuration must be set for the product to respond correctly
to the controller(s).
Control Personalities
The following control personalities are available on the Maverick MK2 Wash:
Single Control
Basic (20-channel)
Standard (68-channel)
Advanced (122-channel)
Tour (146-channel)
Uses DMX, Art-Net™, sACN, or
WDMX
Single Control
In Single Control mode, the Maverick MK2 Wash is controlled by a single protocol input. Choose from
DMX, Art-Net™, sACN, or WDMX. In this mode, the four personalities available are: Basic (20 channels),
Standard (68 channels), Advanced (122 channels), and Tour (146 channels).
Single control protocol
To select the Single Control Protocol, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Control Settings, or touch the display
where it says Control Settings.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Single Control, or touch the display where it says Single
Control.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP> or <DOWN> to select from DMX, ArtNet, sACN, or WDMX, or touch the display where
it says the desired protocol option.
7. If using the buttons instead of the touchscreen, press <ENTER>.
Single control personality
To select the Single Control personality, set the Protocol, then do the following:
1. Use <UP> or <DOWN> to select Personality, or touch the display where it says Personality.
2. If using the buttons instead of the touchscreen, press <ENTER>.
3. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from Basic (20-channel), Standard
(68-channel), Advanced (122-channel), or Tour (146-channel), or touch the display where it says
the desired personality.
4. If using the buttons instead of the touchscreen, press <ENTER>.
For WDMX control, ensure the antenna is raised, and there are no obstructions between
the controller and the product. See
Maverick MK2 Wash User Manual Rev. 15
Programming Levels
Green Fine
(all, 1–12)
Blue (all, 1–12)
Blue Fine
(all, 1–12)
White (all, 1–12)
White Fine
(all, 1–12)
Dual Control Movement
Basic (8-channel)
Standard (20-channel)
Advanced (26-channel)
Uses DMX, Art-Net™, or sACN
Home Screen
WDMX reset
Description
Shows all current values from input
_ _ _
signals, 000–255
Dual Control Pixels
Basic (36-channel)
Standard (48-channel)
Advanced (96-channel)
Uses DMX, Art-Net™, sACN, or
shows on the display. Press <ENTER>.
for troubleshooting information.
Kling-Net
Page 14 of 197