Publicité
Les langues disponibles
Les langues disponibles
5. Remove the drawer containing the fan and the control accessories (2 screws).
Fig. 18
1.9. AIR REGULATOR INSTALLATION
Your appliance has a convection air intensity regulator that allows you to select the speed of the air
dissipated into the environment. This regulator should be located in a low temperature area.
When the controller is off, a light appears on the ON/OFF button. The regulator is turned on by pressing
the ON/OFF button. At this time, the light on this button turns off and the light on the Speed Selector button
turns on. With the regulator on (light on the speed selector button), it activates the motor (M) when the
minimum temperature set on the thermostat (TM) of 50º C is exceeded.
To set the desired air speed, press the speed selector button. Each time this button is pressed, the air
speed will increase, turning on a led light on the speed ramp shown on the left of the regulator screen.
Speed Selector
Electrical network
ON/OFF button
Diagram electrical connections
Speed ramp
Fig. 19
44
Publicité
